Wall-Mounting - Cisco Catalyst 3560-C Hardware Installation Manual

Mounting the Switch
Figure 2-4
1
2
After you mount the switch, see the
about configuring the switch.

Wall-Mounting

Warning Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
Do not wall-mount the switch with its front panel facing up. Following safety regulations, wall-mount
Caution
the switch with its front panel facing down or to the side to prevent airflow restriction and to provide
easier access to the cables.
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
2-10
Mounting the Switch Under a Desk or Shelf
1
2
3
3
Desk or shelf Slides on this way
Screws
"After Installing the Switch" section on page 2-31
Chapter 2 Switch Installation
for information
OL-23803-02