Cisco Catalyst 3560-C Hardware Installation Manual page 49

Chapter 2 Switch Installation
Removing the Switch from a DIN Rail
Ensure that power is removed from the switch, and disconnect all cables and connectors from the front
Step 1
panel of the switch.
Pull down on the DIN rail mount release tabs. As the clips release, lift the bottom of the switch.
Step 2
See
Figure 2-20
1
OL-23803-02
Figure 2-20.
Switch Removal
1
Switch
Catalyst 3560-C and 2960-C Switch Hardware Installation Guide
Mounting the Switch
2-23