Wall Mounting A Switch - Cisco CBS Series Get To Know

Get To Know Your Switch
Supplied rack mounting for switch models with front mounting position. The mounting ears sit flush to the
front panel.

Wall Mounting a Switch

You can mount the switches on a wall, using wall studs or to a firmly attached plywood mounting backboard.
Caution
Read these instructions carefully before beginning installation. Failure to use the correct hardware or to follow
the correct procedures could result in a hazardous situation to people and damage to the system.
Caution Do not wall-mount the switch with its front panel facing up. Following safety regulations, wallmount the
switch with its front panel facing down or to the side to prevent airflow restriction and to provide easier access
to the cables.
To wall-mount a 24-port switch using brackets:
Step 1 Attach a 19-inch bracket to one side of the switch.
Step 2
Repeat the previous step to attach the other bracket to the opposite side of the switch.
Wall Mounting a Switch
Get To Know Your Switch
3