Toshiba Mic Effect - Toshiba Portege M400 User Manual

Operating Basics
Volume control
To adjust the audio volume in Windows for both playback and recording,
click the Levels tab.
To hear the voice from a microphone or the analog sound from the line
input, disable the Mute button in the Input Monitor, and then disable the
Audio power management function described below.
Audio power management
The audio controller can be powered down when the audio function is not
used. To disable audio power management, follow the steps below.
1. Clicked the Advanced tab.
2. Check the Enable Power Management check box.
3. Input a time in Time to Power Saving State.
If the Enable Power Management check box is not checked, the audio
controller will always be in operation.
Graphic equalizer
Adjust the equalizer settings to enhance sound quality.

TOSHIBA Mic Effect

TOSHIBA Mic Effect provides you with a hands-free environment for
holding mutual communication via the Internet Protocol or Local Area
Network. If you wish to communicate with someone on your computer, you
can use a messenger application. However, with such an application, you
would hear your own voice returning to you as echo during the
communication if you did not use a headset system or headphone.
TOSHIBA Mic Effect will reduce these echoes generated on your
computer.
TOSHIBA Mic Effect also provides you the Microphone Array. The
Microphone Array function eliminates sounds and noise originating outside
the range by specifying the target range and direction of the microphone
input.
For more instructions for this software, click start, point to All Programs,
point to TOSHIBA, point to Utilities and click TOSHIBA Mic Effect Help.
4-40 User's Manual