Quick Start - Alto APM10 User Manual

3. QUICK START

This is the fastest way to get something out from your APM Series, if you have a keyboard
and a microphone.
a. Plug the microphone into Channel 1 MIC IN.
b. Turn down AUX and LEVEL controls on the input channel.
c. Put the EQ controls on center position.
d. Connect 2 passive cabinets to the rear speaker cabinets.
e. Turn on your APM Series.
f. Sing or speak into the microphone with normal volume and adjust the channel LEVEL
control of half.
g. If you like, you can adjust the EQ at this stage.
h. The LED on the Master LED meter should flash only occasionally, otherwise you will hear
distortion. If this LED is not active and you still hear distortion, please turn down a little
the input LEVEL control or reduce the output level of your source instrument.
i. Connect your stereo keyboard into channel 9/10 and repeat the sequence.(for APM120)
Connect your stereo keyboard into channel 13/14 and repeat the sequence.(for APM160)
Here you are. It is your first gig with your APM Series.
3