OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The other control knobs are located at the base of the monitor (See Figure
3). By changing these settings, the picture can be adjusted to your personal
preferences.
•
The power cord should be connected.
•
Connect the video cable from the monitor to the video card.
•
To turn the monitor on, press the POWER switch to ON position. The
power indicator will light up.
•
Your monitor features a unique quick switch system which provides a
picture within seconds after the monitor is switched on.
1
2
7Vlr/7Vlr+
Figure 3
EXTERNAL CONTROLS
7Vlr/7Vlr+
1. OSD
2. Shuttle Knob
3. Standby Power
ON/OFF Switch
4. Power Indicator
4
3
External Control Knob
7VlrA/7VlrA+
1.
OSD
2.
Shuttle Knob
3.
Standby Power
ON/OFF Switch
4.
Power Indicator
5
5
8
6
7
7VlrA/7VlrA+
5. Earphone Jack
6. Volume
7.
Audio Power Indicator
8.
Audio Power ON/OFF
1
2
3
4