Table of Contents
Advertisement
IV. TROUBLESHOOTING
The ACT LED doesn't light.
•
Make sure you've loaded the correct network drivers.
•
The network may be idle. Try accessing a server.
•
The adapter isn't transmitting or receiving data. Try another adapter.
•
May not be using four-pair cable for TX wiring.
The adapter stopped working when another adapter was added to the computer.
•
Make sure the cable is connected to the ASUS PCI-L101 PCI adapter.
•
Make sure your PCI BIOS is current.
•
Make sure the other adapter supports shared interrupts. Also, make sure your oper-
ating system supports shared interrupts — OS/2* doesn't.
•
Try reseating the newest adapter.
The adapter stopped working without apparent cause.
•
Try reseating the adapter first, then try a different slot if necessary.
•
The network driver files may be corrupt or deleted. Delete and then reinstall the
drivers.
•
Try a different ASUS PCI-L101 PCI adapter.
•
Run the diagnostics.
The Wake On LAN feature is not working.
•
Make sure the WOL cable is attached and power is applied to the computer.
•
Check the BIOS for its WOL setting. Some computers may need to be configured
to WOL.
•
Make sure the network cable is fully attached to the adapter.
Link LED does not light when power is connected.
•
Make sure WOL cable is attached and power is applied to computer.
•
Make sure network cable is attached at both ends.
ASUS PCI-L101 User's Manual
23
Advertisement
Table of Contents
