Asus PCI-L101 User Manual page 20

If you have multiple adapters, click the "Show All Adapters" box and then select the
adapter you are configuring (you can identify it by its Ethernet address). Each adapter
must be configured separately.
3. From the window that appears, click Change.
4. From the Adapter Setup window, click the menu for Network Speed.
5. Click 100 or 10 Mbps, depending on hub speed.
6. Click the menu for Duplex Mode
7. Click Full.
8. Click OK when finished.
9. Click Restart Windows NT.
Windows 95
While running Windows 95:
1. From the Control Panel, double-click the Intel PROSet icon.
2. PROSet examines your system and displays the Adapter Setup window. If you
have multiple adapters, click the adapter you are configuring (you can identify it
by its Ethernet address). Each adapter must be configured separately.
3. From the window that appears, click Change.
4. From the Adapter Setup window, click the menu for Network Speed.
5. Click 100 or 10 Mbps, depending on hub speed.
6. Click the menu for Duplex Mode
7. Click Full.
8. Click OK when finished.
9. Click OK to restart Windows 95.
Other operating systems
See the Adapter Installation and Special Configurations README file. "Push" Instal-
lation for Windows 95
If you are a LAN Administrator setting up server-based push installation of Windows
95 as defined in Microsoft Windows 95 Resource Kit, additional steps are required for
this adapter.
20
III. DRIVERS
ASUS PCI-L101 User's Manual