Table of Contents
Advertisement
Install network drivers - Windows NT Version 3.5x only.
After putting the adapter in the computer and starting Windows NT, you need to install
the Intel drivers and test the adapter.
1. Double-click the Network icon in the Control Panel.
2. Click Add Adapter.
3. When the list of adapters appears, scroll to the end of the list and select <Other>
Requires disk from manufacturer.
4. Insert the ASUS Configuration and Drivers disk in the A: drive and click OK.
5. Select the "Intel EtherExpress PRO Adapter" and click OK.
6. Click OK in the Network Settings dialog box and remove the installation disk.
When prompted, restart Windows NT.
To install multiple adapters, repeat this procedure for each new adapter.
Troubleshooting
If Windows NT reports an error or you can't connect to the network, try the suggestions
here first, then turn to the Troubleshooting section if necessary.
•
Make sure you're using the drivers for this adapter. Drivers are located on the
Windows NT CD-ROM or on the ASUS Drivers and Configuration disk.
•
Make sure the driver is loaded and the protocols are bound. Check the Network
Bindings dialog box in Windows NT.
•
Check the Windows NT Event Viewer for error messages.
•
If you are attaching to a NetWare network, check your frame type and verify that
NetWare client software has been installed.
•
Check with your LAN administrator — you may need to install supplemental net-
working software.
III. DRIVERS
ASUS PCI-L101 User's Manual
15
Advertisement
Table of Contents
