Call Transfer With Camp-On - Toshiba DP5000-Series User Manual

Call Transfer with Camp-on

You can transfer a call to a busy station from either a DSS console or an ADM. Use
the DSS to transfer the call, even though the DSS LED associated with the station
you are "transferring to" is red.
‰ To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.
You may hear a busy tone. The original caller is placed automatically on hold.
The Line or extension LED flashes green at double the on-hold rate, and the DSS
LED remains steady red.
2. Hang up.
The call rings the called station once with the camp-on tone. While the called sta-
tion is receiving this tone, the Line LED flashes green (on-hold rate) or if you are
on a extension button, it goes idle. The [DSS] LED remains steady red.
CNF #33***
Table 13 Special Characters
– puts the caller on hold and gets new dial tone.
CNF
– code to park call
#33
** – this special character outputs a single * which will select an available orbit
Indicates "stop." The One Touch button blinks rapidly and stops the delivery of
and display the selected orbit on the phone.
the remaining digits in the string until it is pressed again. Multiple "stops" can
*
+
Hold
be programmed into one string.
*
(HOLD)
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter
enables the user to view the selected orbit on the display. The dial string will
additional pause escape sequences. For example, to insert a 17-second
*
restart from this point when the One Touch button is pressed again.
pause, enter
(1~9)
– gets new dial tone on the PDN
FB1
"P" without specifying the duration. In this example, you would see "PP."
** *
#
When the called station answers the transferred call, the Line LED becomes
steady red. The [DSS] LED remains steady red.
Note If the busy station is in the Do Not Disturb mode, the call will not transfer, but
will recall your telephone immediately.
Strata CIX DP5000-series Telephone UG
(HOLD) FB1 #30
– This special character is a Stop. The dial string pauses and
. The display of a pause in the Speed Dial Number shows a
*9*8
01/08