Adm; Buttons And Leds - Toshiba DP5000-Series User Manual

Transmit
Level
Max. (louder)
1. Press
3+6+9+
2. Press
3. Press
FB1
FB1, LED On: Carbon type handset
FB1, LED Off: DP5000 ECM handset (default)

ADM

4. Press
5. Go off-hook, then on-hook to exit the program mode.

Buttons and LEDs

The 10 button LED add on module and the 20 button keystrip add on module have
1. Press +
3
programmable feature buttons that can be assigned as CO Line, Directory Number,
2. Press
DSS, One Touch Speed Dial or any other programmable feature.
3. Set the level using FB1, FB2 and FB3.
When a Programmable Feature Button is programmed as a DSS button or a Line
For Single Line Telephone, use 1,2,3 and Msg. See table below.
button, it will have an LED that provides a status of the outside line or station
assigned to it. The DSS button acts like a speed dial button to a specific extension.
• A station or line shows steady red when in use by others; green when in use by
your extension.
• A DSS LED will flash red while making a call and turn intermittently green once
connected.
• An outside Line LED is green when the outside line is in use by your extension.
It is red if it is in use by another telephone user.
4. Press
5. Go Off-hook, then on-hook to exit the program mode.
Transmit
Level
Strata CIX DP5000-series Telephone UG
OFF
(simultaneously).
(Hold)
.
(Spdial)
to toggle On/Off.
to set the option.
(Hold)
+ + (simultaneously).
6 9 (Hold)
.
(Redial)
to set the option.
(Hold)
01/08
ON OFF +4 dB