Call Transfer With Camp-On - Toshiba Strata VIe User Manual

CALL HOLD and TRANSFER (cont.)

CALL TRANSFER WITH CAMP-ON

This feature allows you to transfer an outside call to
a station that is either idle or busy.
TO TRANSFER A CALL
1) While connected to an outside call, depress the
The CO LED changes to conference flash.
l
The INT LED will flash at the l-use flash rate.
l
Intercom dial tone is heard.
l
2) Dial the station number to which the call is to be
transferred.
You will hear a single ring tone.
l
5) Hang up.
INT LED goes off.
l
CO LED changes to the l-hold flash rate.
l
The CO line rings the called station.
l
CO LED illuminates steadily when the called
l
station connects with the transferred call.
If the station fails to answer the call, you will
l
receive a recall ring after a predetermined time.
Busy tone is heard.
l
INT LED goes off.
l
CO LED changes to l-hold flash rate.
l
The CO line is camped-on to the called station.
l
The called. station hears a warning tone.
l
CO LED illuminates steadily when the station
l
connects with the transferred call.
NOTES:
1 . The Busy Override feature may be used instead of
transfer camp-on.
2. The call will recall you and camp-on is cancelled if
the station does not pick it up within a predeter-
mined time. Inform the caller of the situation, and
repeat the procedure (if necessary).
T O S H I B
(continued)
1
A ,