Basic Operations; Listening To A Source - Yamaha RX-E200 Owner's Manual

BASIC OPERATIONS

Listening to a source

PHONES
NATURAL SOUND STEREO RECEIVER RX-E200
TIMER
STANDBY
DISPLAY MEMORY AUTO/MAN'L
TIME ADJ TIMER
STANDBY/ON PHONES
STANDBY/ON
POWER
1
1
4
4
7
7
0
FREQ/RDS MODE – PTY SEEK – START
REP RANDOM
A
TEXT/TIME
D
DIRECTION
PRESET TUNER
MD
MD
REC/PAUSE
MODE DUBBING
SLEEP
VOLUME
8
TREBLE VOLUME
VOLUME
PRESET/BAND PRESET/TUNING
MIN
HOUR MIN INPUT
BASS TREBLE BALANCE
– + – +
L R
BASS BALANCE INPUT
POWER
2 3
2 3
5 6
5 6
8 9
8
+10 +100
PROG
B C
R. TIME
E
TAPE
PRESET
CD TAPE
AUX
TAPE
REC/PAUSE
START
DISPLAY
VOLUME –/+
1
Set the volume to "MIN" by turning VOLUME.
2
Turn on the power by pressing STANDBY/ON on
the front panel, or POWER on the remote control.
• PianoCraft series components that have correct
system connections made to RX-E200 can be
controlled to turn into the on or standby mode by
RX-E200. However, once the connected
components are turned into the standby mode with
their respective STANDBY/ON button, they
MAX
cannot be controlled by RX-E200 STANDBY/
ON button.
3
Select the desired input source by turning INPUT so
that the source appears on the display.
• When you operate the component connected to the
AUX terminal, turn INPUT to select AUX.
4
Play the source. (Refer to the owner's manual
supplied with each selected component.)
5
Adjust the volume level by turning VOLUME on the
front panel or pressing VOLUME + on the remote
control.
6
If desired, adjust BASS, TREBLE, and BALANCE.
BASS: Turn this control clockwise to increase (or
counterclockwise to decrease) the low frequency
response.
TREBLE: Turn this control clockwise to increase (or
counterclockwise to decrease) the high frequency
response.
BALANCE: Adjust the balance of the output volume
from the left and right speakers to compensate for
sound imbalance caused by the speaker location or
listening room conditions.
When you use headphones
Connect the headphones to the PHONES jack. You can
listen to the sound to be output from the main speakers
through the headphones.
When you have finished using this
unit
Press STANDBY/ON on the front panel again or
POWER on the remote control to set this unit to the
standby mode.
• The STANDBY indicator lights up.
Auto standby function
RX-E200 will be put automatically into the standby mode
under the following conditions:
• The component connected to RX-E200 is in stop mode
and not operated for 30 minutes.
• TUNER or AUX is not selected as an input source.