Basic Operations - Yamaha VCD-102K Owner's Manual

This manual mainly describes how to operate this unit by using the remote control transmitter. To operate this unit from
the front panel, use the same named buttons on the front panel.
For information about the Playback Control operation for Video CDs, version 2.0, refer to pages 18–20.
Loading discs and starting disc play
1
POWER
1
Turn the power on.
2
Open the disc tray and load discs.
OPEN/CLOSE
3
Close the disc tray.
OPEN/CLOSE
Note
Additionally, you can close the disc tray by the following ways.
If the tray is closed by these ways, play will begin
automatically.
Press the PLAY/SELECT button. (Play will begin from the
first track of Disc 1.)
Press a numeric button.
Press the front edge of the disc tray gently. (Play will begin
from the first track of Disc 1.)

BASIC OPERATIONS

NATURAL SOUND VIDEO CD CHANGER
VIDEO CD
POWER
Label side
upward.
Disc tray
MPX KARAOKE
STOP/
1
+10
RETURN
4
Start a disc play.
Play will begin from the first track of Disc 1 automatically.
* If you want to play a desired track on another disc, see
the next page.
This unit stops at the beginning of the first track on the disc.
Notes
If the STOP/RETURN button is not pressed (except when
"KARAOKE" is illuminated on the display), play will not stop
until the last track on the last-numbered disc has been
played.
When you press the STOP button during Video CD
playback except in the Playback Control and Karaoke
modes, the unit stops five seconds before the playback
ends and displays the time. The unit is in the resume play
mode.
Pressing the PLAY button in the resume play mode starts
playing from the last playback position.
Pressing the STOP button again when the unit is in the
resume play mode cancels the resume play mode.
KEY CONTROL OPEN/CLOSE
KARAOKE MPX
ON SCREEN
PROG CANCEL ENTER S/F REP
+10
1 2 3 4 5
6 7 8 9 0
DIGEST INTRO DISC SKIP
TIME INDEX SEARCH
INDEX PREV SKIP NEXT
SLOW PAUSE STOP PLAY/REPEAT
RETURN SELECT
PLAY/REPEAT
SELECT
To stop play
STOP
RETURN
2, 3
4
9