Cleaning And Maintenance - Panasonic PT-LC76U Operating Instructions Manual

Problem
The picture does
B The signal format (TV system) may not be set
not display
correctly.
correctly.
B There may be a problem with the video tape or
other signal source.
B A signal which is not compatible with the projector
may be being input.
Picture from
B The cable may be too long.
computer does B The external video output for the laptop computer
not appear. may not be set correctly.
(You may be able to change the external output
settings by pressing the [Fn]+[F3] or [Fn]+[F10]
keys simultaneously. The actual method varies
depending on the type of computer, so refer to the
documentation provided with your computer for
further details.)
B If an RGB input indicator is turned off, the video
signals may not be output from the computer.
B RGB2 SELECT in the OPTION1 menu is set to
OUTPUT when the signals are input to RGB2 IN /
RGB1 OUT connector.
54-E
NGLISH
Possible cause

Cleaning and maintenance

Page
36
Before carrying out cleaning and maintenance, be
sure to disconnect the power cord plug from the
wall outlet.
58
Wipe the cabinet with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in water with a small amount
of neutral detergent in it, squeeze the cloth very well, and then wipe the
cabinet. After cleaning, wipe the cabinet dry with a dry cloth.
If using a chemically-treated cloth, read the instructions supplied with
the cloth before use.
Do not wipe the lens with a cloth that is dusty or which produces lint.
If any dust or lint gets onto the lens, such dust or lint will be magnified and
projected onto the screen. Use a blower to clean any dust and lint from the
lens surface, or use a soft cloth to wipe off any dust or lint.
14,
25
42
E -55
NGLISH