HP ProCurve 2910al Series Installation And Getting Started Manual page 17

Expansion Module LED
Mdl
ProCurve Switch
2910bl-48G Link 1 Mode
J9147A
Power
Fault
Locator
Act
Status
LED
Tmp FDx
Mode
Fan Spd *
Test Usr
Console
2
Link Mode
Reset Clear
LED Mode select button
and indicator LEDs
Figure 1-5.
HP ProCurve 2910al-48G Switch
Expansion Module LEDs
Mdl EPS
ProCurve Switch
2910bl-48G-PoE Link 1
J9148A
PoE+
Power
Fault Act
Status
Locator PoE FDx
LED
Mode
Tmp Spd *
Fan PoE
Test Usr
Console
2
Link
Reset Clear
LED Mode select button
and indicator LEDs
Figure 1-6. HP ProCurve 2910al-48G-PoE+ Switch
■ The PoE+ switches have an additional mode, PoE. In PoE mode, the Link
LED indicates the PoE configuration for the port:
• On if PoE is enabled on the port
• Off if PoE is disabled on the port.
Each port has a Link LED. If it is lit, the port has a link. If the Link LED is
■
Blinking, the port has failed its self test. The Fault and Self Test LEDs will
be Blinking simultaneously.
■ If the Activity (Act) indicator LED is lit, each port LED displays activity
information for the associated port—it flickers as network traffic is
received and transmitted through the port.
If the Full Duplex (FDx) indicator LED is lit, the port LEDs light for those
■
ports that are operating in full duplex.
■ If the Speed (Spd) indicator LED is lit, the port LEDs behave as follows
to indicate the connection speed for the port:
• Off = 10 Mbps
• Blinking = 100 Mbps (the Blinking behavior is a repeated on/off cycle
once every 0.8 sec.)
• On = 1000 Mbps
Port LEDs Link
and Mode
*
RPS Status of the Back Spd mode: off=10 Mbps, 2 flash=100 Mbps, on=1 Gbps,
3 5 7 9 11 Link 13 Mode
4 6 8 10 12 14
Link Mode
Port LEDs Link
and Mode
*
RPS Status of the Back Spd mode: off=10 Mbps, 2 flash=100 Mbps, on=1 Gbps,
3 5 7 9 11 13
Mode Link Mode
4 6 8 10 12 14
Mode Link Mode
Introducing the Switch
Front of the Switch
3 flash=10 Gbps 10/100/1000Base-T Ports (1 - 48T) — Ports are Auto-MDIX
15 17 19 21 23 Link 25 Mode 27
16 18 20 22 24 26 28
Link Mode
3 flash=10 Gbps PoE+ Integrated 10/100/1000Base-T Ports (1 - 48T) — Ports are Auto-MDIX
15 17 19 21 23 25 27
Link Mode
16 18 20 22 24 26 28
Link Mode
29
30
29
30
1-9