Janome MEMORY CRAFT 9500 Instruction Book page 70

Insert an additional spool pin, and put a felt and spool
on it.
Draw both threads from the spools and pass them
through the threading points from 1 to 5 .
Make sure that the two strings of thread from the
spools do not get tangled.
NOTES:
Make sure each threads wind off from the spools as
shown.
Threading from points 1 to 5 is the same as for a
2 1
single needle.
Slip one of the threads through the needle bar thread
guide on the left, and the other one on the right.
4
Thread the needles from the front to back.
NOTES:
The Built-in Needle Threader cannot be used for the
twin needle.
When changing the sewing direction, raise the needle
3
and turn the fabric.
5
6
7
69