Update Software; Figure 37: Alternate Update Satellite Table Popup Window - Andrew OMACS3000 User Manual

11-APR-06 Rev E OMACS3000
If the operator selects the Update Table button when no geo.txt file has been loaded into the local directory
Figure 37
(C:\ACS3000\antennaID\) will generate a different popup window as display by . This allows the
operator to use the current geo.txt file that is already loaded on the ACU. This may be necessary to correct
errors in Norad data on the table entered by editing. Selecting OK will generate the same popup windows as
were generated by the previous method of updating the Satellite Table. Selecting the Satellite Table button
from the control panel will display the updated satellite table.

Figure 37: Alternate Update Satellite Table Popup Window

INTELSAT data in the satellite table must be updated on a satellite-by-satellite basis and entered using the
edit satellite data option for a working satellite. The INTELSAT data web site is
http://www.intelsat.com/ephemeris/ephemeris.asp. Data may be copied down from that site and entered in
the appropriate satellite entries.

Update Software

Right clicking on the Update Table button on the control panel allows the operator to access the Update
Software button (see Figure 39). If a valid update file has been copied into the C:\ACS3000\antennaID
directory, the update will request confirmation as shown in Figure 39. If no update file is available in the
specified directory, a popup window will notify the operator of the request denied status as shown in Figure
40
49 of 51 System Screens