Activating Your Phone - Samsung Gem User Manual

Portable dual-band
Hide thumbs Also See for Gem:
Table of Contents

Advertisement

Low battery indicator
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Six bars (
) indicate a full charge.
An low battery icon (
A blinking empty battery icon (
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
) in the upper-right side of the
) indicates a near empty battery.
) and a tone sounding indicate you
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
If needed, lay the phone face down. Pull up using the slot
1.
provided (1), while lifting the battery cover off the phone
(2).
Getting Started
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gem sch-i100

Table of Contents