Table of Contents
Advertisement
Step 8:
Step 9:
Step 10:
Step 11:
2-5:Create a"RAID Ready" System into" RAID 0" with two Hard Drives by 'Create RAID Volume '.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
At least select two HDD as Menber Hard Drive(s).
Specify Volume Size then press "next".
Press "next" to finish setup and start create RAID 10.
It may takes half and hours to create RAID 10.After create completely,it will ask to
reboot to finish create RAID10.
Install Vista OS with one SATA HDD.
Shut down the system,then add another two serial ATA hard drives in the system.
Boot to OS desktop, open the Intel® Matrix Storage Console.
Click on the by'Create RAID Volume' to create a RAID volume.
Click "Next" at create a RAID volume window.
Key the name in "Volume Name" and select "RAID 0" in RAID Level.
At least select two HDDs as "Volume Location".
Picture16
Hide quick links:
Advertisement
Table of Contents
