Table of Contents
Advertisement
2-2:Create a"RAID Ready" System into" RAID 1" with two Hard Drives by'Create RAID Volume from
Existing HDD Drive '.
Step 1:
Step 2:
Step 3:
Step 4:
Step 5:
Step 6:
Step 7:
Step 8:
Step 9:
Step 10:
Step 11:
Install Vista OS with one SATA HDD.
Shut down the system,then add another Serial ATA hard drive in the system.
Boot to OS desktop, open the Intel® Matrix Storage Console.
Click on the by'Create RAID Volume from Existing HDD Drive ' to create a RAID
volume.
Click "Next" at create a RAID volume window.
Key the name in "Volume Name" and select "RAID 1" in RAID Level.
Select minimum HDD as "Source Hard Drive".
Select Menber Hard Drive(s).
Specify Volume Size then press "next".
Press "next" to finish setup and start create RAID1.
It may takes half and hours to create RAID1.After create completely,it will ask to
reboot to finish create RAID1.
Picture10
Hide quick links:
Advertisement
Table of Contents
