Radio - Basic Operation And Storing - JAMO S 502 User Manual

Radio - Basic operation and storing

If the antennas are correctly connected, you should be able to listen to FM radio.
Press SOURCE to select the tuner.
REMOTE CONTROLLER
Selecting preset programs
To select preset programs, press
Manually find and store a radio station
1. Press and hold SCAN - or SCAN + until the frequency indicator starts to
change, then release. The system automatically tunes to the next strong radio
station.
2. Press SLOW/MEMORY
3. Enter a number between 01-40.
4. Press SLOW/MEMORY.
You station is now saved.
Automatically find and store a radio station
1. Press and hold PROGRAM for more than 5 seconds, all radio stations with
strong signal strength will be stored automatically
2. The system will stop when all the available stations are stored or the memory
of 40 preset radio stations is full.
Stereo and mono reception
If the signal from the FM stereo station is weak, you can improve the sound qual-
ity by switching to mono reception. To do this, press the MONO/STEREO button
on the remote.
RDS station service
RDS (Radio Data System) is an additional information system provided by most
FM stations.
If a RDS station is being received, you can see programme information on the S
DVR 52 display by pressing DISPLAY on the remote.
FM 92.90
M H Z
PRESET -or PRESET + on the remote.
P3 FM 92.90
M H Z
19