Geneal Setup; General Setup - JAMO S 502 User Manual

General Setup

To access the S DVR 52 setup menu, press "SETUP".
Use / / / to browse through the menus, and press "OK" to select an item.
To exit System Setup, press "SETUP".
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
SCREEN SAVER
RESOLUTION
VIDEO OUTPUT
MAIN PAGE
GENERAL SETUP
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
SCREEN SAVER
RESOLUTION
VIDEO OUTPUT
MAIN PAGE
SET TV STANDARD
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
SCREEN SAVER
RESOLUTION
VIDEO OUTPUT
MAIN PAGE
SCREEN SAVER SETTING
12
4 : 3 PS
4 : 3 LB
16 : 9
MULTI SYSTEM
NTSC
PAL
ON
OFF
TV DISPLAY
You can select the aspect ratio that is appropriate for your TV
display. The default setting is 16:9.
• 4:3 LB
If you have a conventional 'square' set
and would like to see the DVD picture
in its full format, use this setting. Wide
bands will be displayed on the upper
and lower portions of the TV screen.
• 4:3 PS
If you have a conventional TV set and
would like to see the DVD picture fill
your TV screen then use this setting. A
wide picture is displayed on the whole
TV screen with a portion automatically
out off.
• 16:9
If you have a widescreen TV set, use this
setting (you must also set your wide-
screen TV to it's 16:9 mode.).
TV TYPE
Choose between Multi System (the connected TV is compat-
ible with both NTSC and PAL), NTSC and PAL video output
from the S DVR 52.
The default setting should be appropriate for your region
- changing it may result in poor picture quality.
SCREEN SAVER
Turns screen saver ON and OFF.