Directing The Display When You Turn The Computer On - Toshiba Satellite 110 Series User Manual

Directing the Display When You Turn the Computer On

When you turn the computer on, it sends information to the exter-
nal monitor. To send information to the built-in display as well,
you'll need to change the setting in Hardware Setup or TSETUP.
The Power On Display option has two settings:
Internal/External sends the display to the external monitor. If
no external monitor is attached, it sends information to the
computer's built-in display. (This is the default).
Simultaneous sends display output to both the external monitor
and the built-in display. This is especially useful if you're mak-
ing a presentation and cannot see the external monitor easily.
This section explains how to change the Power On Display option
using Hardware Setup. To change this option using TSETUP, see
"TSETUP" on page 307.
The Hardware Configuration program lets you set configuration
options in Windows 95. To set the Power On Display option in
Windows 95, follow these steps:
1 Click Start, then point to Programs.
2 Point to Toshiba Utilities, then click Hardware Setup.
Hardware Setup displays the Hardware Configuration
dialog box.
The Hardware Configuration dialog box
This box contains information about the system.
Part I: Getting To Know Your Computer
Using Your Computer on Your Desk
Using an External Monitor
165