MSI X58 Platinum Series User Manual page 71

M S-7522 M ainboard
Important
1. Please refer to the block diagram below about the M-Flash function.
Set [BIOS Update] or [USB Drive] in
"M-Flash function as" field
Select BIOS file from the root directory of
USB/ Storage drive (FAT/FAT32 format only)
in "Load BIOS source file from" field
SYSTEM Restart
Check the storage device
BIOS update successfully
Boot from the USB drive successfully
2. Due to the special design of some graphics cards will cause dark screen
during M-flash operation, and you may refer the beeps from the system to
confirm the current M-flash process.
Load BIOS source file from
W hen the M-Flash function as sets to [USB Drive] or [BIOS Update], this item
is selectable. Using this item to select particular BIOS file from the USB/ Storage
(FAT/32 format only) drive.
3-30
Save changes and
exit the BIOS setup
Start M-Flash
4 short beeps
and file status
2 long beeps
Success
or
Please check USB drive/
Storage drive/ BIOS file
status and reboot the
system manually again.
Fail
The selected file/ USB
drive / Storage drive can
not be recognized.