M S-7522 M ainboard
Introduction
JMicron JMB322 offers RAID level 0 (Striping), RAID level 1 (Mirroring and Duplexing)
and JBOD (Concatenate) for SATA ports (SATA7/8) on this mainboard.
RAID 0 breaks the data into blocks which are written to separate hard drives. Spreading
the hard drive I/O load across independent channels greatly improves I/O performance.
RAID 1 provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
JBOD provides a method for combining drives of different sizes into one large disk.
Important
The least number of hard drives for RAID 0, RAID 1 or JBOD mode is 2. All
the information/ volumes/ pictures listed in your system might differ from
the illustrations in this appendix.
D-2