Test Mode - Sony STR-DE597P Service Manual

Fm stereo/fm-am receiver
Hide thumbs Also See for STR-DE597P:
Table of Contents

Advertisement

FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
While depressing the [FM MODE] and the [DISPLAY] buttons
simultaneously, press the
?/1
The message "FACTORY" appears for a moment and the present
contents are reset to the default values.
AM CHANNEL STEP 9 kHz/10 kHz SELECTION
MODE (US model only)
* Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
* Procedure:
Press the [TUNER FM/AM] button to set AM and press the
button to turn off the main power.
While depressing the [PRESET TUNING +] button or the
[TUNING +] button, press the
power.
Either the message "9k STEP" or "10k STEP" appears for a
moment and select the desired step.
SPEAKER SIZE SELECTION MODE
* Either the normal speaker or micro satellite speaker can be se-
lected.
* Procedure:
While depressing the [DIMMER] button, press the
turn on the main power.
Either the message "NORM. SP." or "MICRO SP." appears for a
moment and select the desired speaker size.
VACUUM FLUORESCENT DISPLAY TEST MODE
* All fluorescent segments are tested.
When this test is activated, all segments light on at the same
time, then each segment lights on one after another.
* Procedure:
While depressing the [TUNING ---] and the [SPEAKERS $OFF/A/
B/A+B%] buttons simultaneously, press the
the main power.
1. ALL segments light on.
SP A
D D
DIGITALEX
D D
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
LFE
SW
SP B SLEEP OPT COAX MULTI CH IN 96/24
L
C
R
SL
S
SR
SBL SB SBR
[2CH], [A.F.D.], [MOVIE], [MUSIC] and [MULTI CHANNEL DE-
CODING] LED light on.
2. Press the [VIDEO 1] button, confirm display.
LFE
SP A
D D
DIGITALEX
D D
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
SW
SP B SLEEP OPT COAX MULTI CH IN 96/24
L
R
S
SB
[A.F.D.] and [MUSIC] LED light on.
3. Press the [VIDEO 1] button, confirm display.
SP A
DIGITALEX
PRO LOGIC II x DTS-ES NEO:6 MPEG-2 AAC RDS
D D
D D
SP B SLEEP OPT COAX MULTI CH IN 96/24
C
SL
SR
SBL
SBR
[2CH], [MOVIE] and [MULTI CHANNEL DECODING] LED light
on.
SECTION 3

TEST MODE

button to turn on the main power.
?/1
?/1
button to turn on the main
button to
?/1
?/1
button to turn on
MEMORY
D.RANGE EQ STEREO MONO
DIRECT
dB
kHz
mft.
MHz
MEMORY
D.RANGE EQ STEREO MONO
DIRECT
dB
kHz
mft.
MHz
MEMORY
D.RANGE EQ STEREO MONO
DIRECT
kHz
mft.
MHz
4. Press the [VIDEO 1] button, all segments and all LEDs light off.
5. Every pressing the [VIDEO 1] button turns on each segment and
LED one after another in the same order.
(Not only the [VIDEO 1] button, but also the other buttons such
as [VIDEO 2], [DVD], [MD/TAPE], [SA-CD/CD] and [TUNER FM/
AM] can be used.)
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
* Procedure:
While depressing the [2CH] button, press the
on the main power.
The message "SF. CLR." appears for a moment and initializa-
tion is performed.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
While depressing the [TUNING ---] and the [DISPLAY] buttons
simultaneously, press the
?/1
The model name, destination and the software version are dis-
played for a moment.
KEY CHECK MODE
* Button check
* Procedure:
While depressing the [TUNING ---] and the [MAIN MENU] buttons
simultaneously, press the
?/1
Either the message "REST 28" appears.
Every pressing of any button other than the
the buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed "REST 00" appears.
AUTOBETICAL MODE (AEP, UK model only)
* When this mode is used, the receiver scans the broadcasts that
can be received by the tuner, and sets up the broadcasts.
Be sure to start scanning after connecting the antenna.
* Procedure:
Check that the antenna is connected.
While depressing the [MEMORY] button, press the
to turn on the main power.
The message "AUTO-BETICAL SELECT" appears for a mo-
ment and the receiver starts scanning.
COMMAND MODE SELECTION MODE
* The command mode (AV1 or AV2) of the remote commander
can be selected.
* Procedure:
While depressing the [ENTER] button, press the
turn on the main power.
Either the message "C.MODE.AV 1" or "C.MODE.AV 2" ap-
pears for a moment and select the desired mode.
STR-DE597P/K6800P
?/1
button to turn
button to turn on the main power.
button to turn on the main power.
?/1
counts down
button
?/1
button to
?/1
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Str-k6800p

Table of Contents