3.4.4.1.
Adding Paper
1.
Remove all of the installed paper.
2.
Add paper to the stack of paper you removed and straighten.
3.
Follow steps 1 to 4 above.
3.4.5.
DOCUMENTS THE UNIT CAN FEED
3.4.5.1.
USING THE ADF (AUTO DOCUMENT FEEDER)
Note:
· Remove chips, staples or other similar fasteners.
· Do not send the following types of documents. (Use the scanner glass for fax transmission.)
— Chemically treated paper such as carbon or carbonless duplicating paper
— Electrostatically charged paper
— Badly curled, creased or torn paper
— Paper with a coated surface
3.4.5.2.
USING SCANNER GLASS
Effective scanning area is changed depending on the setting of the paper size. (# 16 PROGRAM MODE TABLE P.78)
Note for the auto document feeder and the scanner glass
· Check that ink, paste or correction fluid has dried completely.
· Do not send the following types of documents: (Use copies for fax transmission.)
− − − − Paper with a faint image
− − − − Paper with printing on the opposite side that can be seen through the other side (i.e. newspaper)
· To transmit the document with a width of less than A4 size (210 mm), we recommend transmitting the document using the
scanner glass.
21
KX-FLB758RU