Panasonic KX-FLB758RU Service Manual page 120

KX-FLB758RU
For the receiving problem, we have thought of causes other than in the software. Some causes may be when the fax changes
to the memory receiving mode (for example, when out of paper). and the memory becomes full of the unprinted fax data. In this
case, [MEMORY FULL] and its main cause (for example, "OUT OF PAPER") are displayed on the LCD. Accordingly, by solving
the main problem, [MEMORY FULL] can be canceled and the receiving problem can solved. The causes of the display errors
are shown below.
MODEM ERROR
CHANGE DRUM
CHECK ADF CABLE
CHECK DOCUMENT
COVER OPEN
DATA IN MEMORY
CLOSE ADF COVER
DIRECTORY FULL
FAILED PICK UP
Please refer to USER RECOVERABLE ERRORS (P.69) for the above items.
Also, when it actually becomes a hardware deformity, please check each sensor.
6.5.10.1.4. THE UNIT CAN COPY, BUT CANNOT TRANSMIT/RECEIVE
CROSS REFERENCE:
TEST FUNCTIONS (P.74)
FAX IN MEMORY
FAX MEMORY FULL
LINE IN USE
MEMORY FULL
MODEM ERROR
NO FAX REPLY
OUT OF PAPER
PAPER JAMMED
PC FAIL OR BUSY
120
PLEASE WAIT
REDIAL TIME OUT
REMOVE DOCUMENT
TONER EMPTY
TONER LOW
TRANSMIT ERROR
WRONG PAPER
CARRIAGE ERROR