Table of Contents
Advertisement
a Suspension cables
b Canopy
c OdorFree charcoal filter holders
d Grease filters
e Control panel
The symbols serve as sensor buttons.
You select the functions by pressing
these buttons.
You will hear a brief beep as
confirmation.
f Overhead lighting
g OdorFree charcoal filters (2)
h Recirculating vents
(recirculation mode only)
Guide to the ventilation system
Sensor buttons
i Overhead lighting
Use this button to turn the lighting
On/Off and also adjust the brightness.
j Fan On/Off
k Fan power selection
l Delayed shut down
Use this button to activate the delayed
shut down feature. When activated, the
fan turns off automatically after either 5
or 15 minutes, as selected.
m Grease filter
This button will light up when the
grease filters need to be cleaned.
Press this button after cleaning the
grease filters to reset the operating
hours timer (see "Cleaning and care").
You can also check the operating hours
and change the timer setting.
n OdorFree charcoal filter button
The button lights up when the charcoal
filters need to be changed. To do this,
the operating hours timer needs to be
activated after installation of the
ventilation system.
Use this button to reset the operating
hours timer after changing the charcoal
filters (see "Cleaning and care").
You can also check the operating hours
and change the timer setting.
9
Advertisement
Table of Contents
