Pride Quantum 610 Series Owner's Manual page 17

V . C O M F O R T A D J U S T M E N T S
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different
heights.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot
platform bracket. See figure 16.
2. Loosen the foot platform securement nut one-half turn.
3. Raise or lower the foot platform to the desired
height.
4. Reinstall the quick release fasteners into the foot
platform bracket and tighten.
5. Tighten the nut to secure.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot
platform bracket. See figure 16.
2. Move the foot platform in or out to the desired
depth.
3. Reinstall the quick release fasteners into the foot
platform bracket and tighten.
Quick Release Fasteners: The foot platform is
attached to the power base with two quick release fas-
teners. See figure 16. Each quick release fastener con-
sists of a bolt, a lever, and a nut. See figure 17. The
lever has a cam on the end that allows it to clamp into
place. The quick release fastener has two states:
clamped and unclamped. When the lever is open, the
quick release fastener is unclamped. When the lever is
closed, the quick release fastener is clamped.
To clamp the quick release fastener:
1. Make sure the lever is in the open position.
2. Turn the nut clockwise until it is snug.
3. Rotate the lever until it is in the fully closed position.
NOTE: If the lever will not rotate to the fully closed
position, then turn the nut counterclockwise one-
quarter or one-half turn.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex
key.
To adjust the foot platform angle:
1. Flip up the foot platform and locate the screw. See
figure 18.
2. Turn the screw to raise or lower the front of the foot
platform.
Quantum 610 Series
QUICK RELEASE
FASTENERS
SCREW
Figure 16. Foot Platform Adjustment
UNCLAMPED
BOLT
LEVER (OPEN)
Figure 17. Quick Release Fastener Operation
Figure 18. Underside of Foot Platform
www.pridemobility.com
FOOT PLATFORM
BRACKET
FOOT PLATFORM RETAINING PIN
SECUREMENT NUT
CLAMPED
LEVER (FULLY
CLOSED)
NUT
CAM
SCREW
17