Service Mode; How To Enter Into Service Mode - Panasonic TC-L47ET5 Service Manual

6 Service Mode

6.1.

How to enter into Service Mode

6.1.1. Purpose
After exchange parts, check and adjust the contents of adjustment mode.
While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds.
Note:
Service Mode can not be entered when 3D signal input.
Input 2D signal to enter Service Mode.
6.1.2. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )
6.1.3. How to exit
Switch off the power with the [POWER] button on the main unit or the [POWER] button on the remote control.
Contents of adjustment mode
6.1.4.
• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
Main item
ADJUST
WB-ADJ
OPTION
SRV-TOOL
Sub item
CONTRAST
COLOR
TINT
SUB-BRT
BACKLGT
B-Y-G
R-Y-A
V COM
R-GAIN
G-GAIN
B-GAIN
R-CENT
G-CENT
B-CENT
Boot
STBY-SET
EMERGENCY
CLK MODE
CLOCK
EDID-CLK
Sample Data
000
50
00
800
086
40
00
000
80
6C
5E
77
80
89
SD
00
ON
00
045
HIGH
00
9
Remark
Factory Preset.
See next.