Pioneer DEH-34UB/XNUC Service Manual page 18

Pioneer cd rds receiver service manual
Table of Contents

Advertisement

1
USB storage device/iPod
A
Message
Cause
NO DEVICE
When plug and
play is off, no
USB storage de-
vice or iPod is
connected.
FRMT READ Sometimes
there is a delay
between the
start of playback
and when you
B
start to hear any
sound.
NO AUDIO
There are no
songs.
The connected
USB storage de-
vice has secur-
ity enabled.
SKIPPED
The connected
USB storage de-
C
vice contains
files embedded
with Windows
Media™ DRM 9/
10.
PROTECT
All the files in
the USB storage
device are em-
bedded with
Windows Media
DRM 9/10.
D
N/A USB
The USB device
connected to is
not supported
by this unit.
CHECK USB The USB con-
nector or USB
cable has short-
E
circuited.
The connected
USB storage de-
vice consumes
more than
500 mA (maxi-
mum allowable
current).
F
18
1
2
Action
 Turn the plug
and play on.
 Connect a com-
patible USB stor-
age device/iPod.
Wait until the
message disap-
pears and you
hear sound.
Transfer the audio
files to the USB
storage device
and connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded
with Windows
Media DRM 9/10.
Transfer audio
files not em-
bedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
 Connect a USB
Mass Storage
Class compliant
device.
 Disconnect
your device and
replace it with a
compatible USB
storage device.
Check that the
USB connector or
USB cable is not
caught in some-
thing or dam-
aged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
DEH-34UB/XNUC
2
3
Message
Cause
Action
The iPod oper-
Make sure the
ates correctly
connection cable
but does not
for the iPod has
charge.
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
ERROR-19
Communication
Perform one of
failed.
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to
the USB source.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
ERROR-23
USB storage de-
USB storage de-
vice was not for-
vice should be for-
matted with
matted with
FAT12, FAT16 or
FAT12, FAT16 or
FAT32.
FAT32.
ERROR-16
The iPod firm-
Update the iPod
ware version is
version.
old.
iPod failure.
Disconnect the
cable from the
iPod. Once the
iPod's main
menu is dis-
played, reconnect
the iPod and reset
it.
STOP
There are no
Select a list that
songs in the
contains songs.
current list.
NOT FOUND No related
Transfer songs to
songs.
the iPod.
3
4
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents