Panasonic ES4029 Operating Instructions Manual page 5

Replacing the system outer foil and the inner
blades
system outer foil
inner blade
Replacing the system outer foil
1. Press the system outer foil
2. Insert the system outer foil by
Replacing the inner blades
1. Press the foil frame release
2. Remove the inner blades one
2 3
3. Insert the inner blades one at
once every year
once every two years
release buttons and lift the
system outer foil upwards as
illustrated.
pushing it downwards until it
clicks.
buttons and lift the outer foil
section upwards as illustrated.
at a time as illustrated.
•
Do not touch the edges
(metal parts) of the inner
blades to prevent injury to
your hand.
a time until they click as
illustrated.
Cleaning with the brush
Removing the built-in rechargeable battery
Remove the built-in rechargeable battery before disposing of the
shaver. Please make sure that the battery is disposed of at an
officially designated location if there is one. Do not dismantle or
replace the battery so that you can use the shaver again. This
could cause fire or an electric shock. Replace it at an authorized
service center.
•
Remove the shaver from the charging adaptor when removing
the battery.
•
Perform steps to and lift the battery, and then remove it.
For environmental protection and recycling of materials
This shaver contains a Nichel-Metal Hydride battery.
Please make sure that the battery is disposed of at an officially
assigned location, if there is one in your country.
1. Clean the inner blades using
the short brush by moving it in
direction.
Clean the system outer foil,
the shaver body and the
trimmer using the long brush.
•
Do not use the short brush to
clean the outer foils.
5