Safety Instructions To ensure proper operation of the appliance, please carefully read all information contained in these Safety Instructions. All information in this section is provided to instruct you in the correct and safe operation of this appliance so that you can avoid injuries to yourself and others as well as damage to property.
Page 6
WARNING! C Regularly clean the cord connector, which Mandatory! plugs into the appliance, to keep it free of dust and foreign objects such as pins, etc. Failure to do so could result in deterioration of the electrical insulation and cause fire. C Never operate the appliance if the cord or Prohibited! adaptor are damaged or overly hot, or if the...
Page 7
CAUTION! Mandatory! C Before use, always make sure that the outer foil has not become damaged or misshapen. Failure to do so can cause damage to skin. C Dry the shaver completely before charging it. Failure to do so could result in short-circuiting, electric shock or fire.
Page 8
(104°F), where it will be exposed to direct sunlight or a heat source, or where there is a lot of moisture. C Use only the included shaver power cord RE7- 22 to charge the ES4036 shaver. C Dry the shaver completely before charging it.
Page 9
NOTICE C Keep the power cord away from water and handle it only with dry hands. Do not use an extension cord to connect the power cord to an outlet. C The shaver may not immediately begin to charge after being placed into the power cord after use.
Parts identification pleted. You can fully charge the shaver in 1 (see fig. 1) hour if it seems to be losing speed. Protective cap A full charge will supply enough Outer foil power for approx. 12 shaves (3 min- utes per shave for a normal beard). Outer foil release buttons Foil frame Cord shaving...
Using the trimmer with running water. Wipe off any moisture from the (see fig. 4) shaver with a dry cloth and remove Slide the trimmer handle up to open the protective cap to allow the outer the trimmer. foil to dry completely. Place the trimmer at a right angle to your skin and move it downward to Brush cleaning...
Page 12
Please make sure that the battery is • Use only the included adaptor RE7-22 disposed of at an officially assigned to charge the ES4036 shaver. location, if there is one in your coun- • Dry the shaver completely before try.
Page 13
time. • Do not wipe any part of the shaver with thinner, benzine or alcohol. Clean it by using a cloth dampened with soapy water. • Do not take the housing apart as this can affect the watertight con- struction. •...