Remote Control - Panasonic CS-YC9MKV-7 Operating Instructions Manual

Indoor unit & outdoor unit
Hide thumbs Also See for CS-YC9MKV-7:
Table of Contents

Advertisement

Available languages

Available languages

REMOTE CONTROL

Maximum distances: 8m
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press
for "
" or
Room
Operation
temperature
mode
23°C & above
Cool
Below 23°C
Dry
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To maintain a good ventilation of the room
• The compressor will not operate during air circulation
operation.
6
(GREEN)
(ORANGE)
for "
".
Standard setting
temperature
(+2°C)
25°C
27°C
22°C
24°C
4
TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/FAN mode, if AUTO is set, the louver swing up/
down automatically.
PRESS TO RESTORE THE REMOTE CONTROL'S
6
DEFAULT SETTING
1
4
(–2°C)
23°C
20°C
Remote Control display
3
2
5
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs-yc12mkv-7Cu-yc9mkv-7Cu-yc12mkv-7

Table of Contents