Information - Panasonic CS-YC9MKV-7 Operating Instructions Manual

INFORMATION

Information for Users on Collection and Disposal of Old Equipment and used Batteries
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical involved.
Pb
FOR SEASONAL INSPECTION AFTER EXTENDED NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• Use Auto OFF/ON button to select Cooling operation. After
15 minutes of operation, it is normal to have the following
temperature difference between air inlet and air outlet vents:
Cooling: ≥ 8°C
FOR EXTENDED NON-USE
• Activate Fan mode for 2~3 hours as an alternative to remove
moisture left in the internal parts thoroughly to prevent mould growth.
• Turn off the power supply.
• Remove the remote control batteries.
Attention:
Check the instructions of use of the product confirming if the polarities (+) and (-) are according
to the indicated direction. Batteries can leak or explode if polarities were inverted, exposed to fire,
disassembled or recharged.
Avoid mixing with other types of batteries or used batteries, carry or store them unattached, because it
increases the risk of leaking.
Take out the batteries from the product if it were not being used, to avoid possible damage in case leak
happens.
Batteries should be stored in dry and ventilated places.
In case leak happens to the battery, avoid touching it. Wash the affected part of the body with plenty
water. If irritation occurs, look for medical aid.
Don't remove the wrapping of the battery.
10
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY then please consult
authorized dealer under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote
control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning
properly.
• The timer indicator blinks and the unit can not
be operated.
Primary Battery