Mechanism Description; Cutter Driver - Toshiba B-SX6T SERIES Maintenance Manual

3. MECHANISM DESCRIPTION

EO18-33017
3.1 Cutter Drive
3. MECHANISM DESCRIPTION
3.1 Cutter Drive
The printer supplies DC +27V to the Cutter Motor to rotate it and the clutch counter clockwise. The arm
swings like a pendulum and moves the swing cutter up and down to make a cut.
Micro Switch
Fixed Cutter
Swing Cutter
Swing Cutter
Cutter Motor
Cutter Motor
Clutch
Arm
After making a cut, the arm turns the Micro Switch off and the cutter home position is detected.
When the cutter does not return to the home position because of a paper jam, an error occurs and the next
piece of paper will not be cut.
Micro Switch
Fixed Cutter
Swing Cutter
P-4x12 Screw
Clutch
Swing Cutter
Cutter Motor
Clutch
S-3x4 Screw
Arm
Cutter Motor
Timing Chart
3- 1