Mcs - Zte ZXR10 5900E Series Hardware Manual

port various gigabit optical modules conforming to SFP standard.
It also supports QXFB and QGLB upstream subcards.
The front view of ZXR10 5928E-FI is as shown in
F 4 ZXR10 5928E-FI F
IGURE
The rear view of ZXR10 5928E-FI is as shown in
F 5 ZXR10 5928E-FI R
IGURE

MCS

MCS is the core of ZXR10 5900E and it mainly implements the
functions of control module and switching module. As for ZXR10
5900E system, MCS is installed in cassette structure and doesn't
have separate panel. Its interfaces and signal indicators are on
system front panel.
1. Interfaces
i. Console Port
Management terminal perform operations and mainte-
nance to ZXR10 5900E through Console port. Console port
is RJ45 socket, connected with COM port on management
terminal by serial console cable. One end of the cable is
RJ45 plug, connected to ZXR10 5900E and the other end
of the cable is DB9 female plug, connected to management
terminal.
ii. Management Interface
Management terminal can perform operations and main-
tenance to ZXR10 5900E through management interface,
which supports 10/100Base-T.
iii. 100/1000Base-T Ethernet Interface
ZXR10 5928E main board supports 1000 Base-TX and
100Base-TX on CAT5. The characteristics are as shown in
Table 2.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 3 Structure and Principle
V
RONT IEW
V
EAR IEW
Figure 4.
Figure 5.
9