ZXR10 Command Manual (MPLS Volume)
Purpose
Command Modes
Syntax
Syntax
Description
Example
History command
Purpose
Command Modes
Syntax
Syntax
Description
Purpose
Command Modes
Syntax
52
Confidential and Proprietary Information of ZTE CORPORATION
tunnel destination
Use this command to configure a destination address for the tun-
nel. Cancel the configuration with the no form of this command.
Interface configuration
tunnel destination {ipv4 | ipv6}<ip-address>
no tunnel destination
<ip-address>
This example sets the destination address of the tunnel as
10.10.10.2:
ZXR10(config)#interface fei_7/1
ZXR10(config-if)#tunnel destination ipv4 10.10.10.2
tunnel source <ip-address>
This command is expressed before the platform version V4.6.01.
The keywords IPv4 and IPv6 are provided after the platform ver-
sion V4.6.01.
tunnel key
Use this command to configure local GRE tunnel to enable the key
option and configure a key. Cancel the configuration with the no
form of this command.
Interface configuration
tunnel key <key>
no tunnel key
<key>
tunnel mode
Use this command to configure the tunnel mode. Cancel the con-
figuration with the no form of this command.
Interface configuration
tunnel mode {gre ip | mpls traffic-eng | ipv6ip [6to4]|ipip
v6}
no tunnel mode
Destination IP address or IPv6 address of the
tunnel
Tunnel key, range: 0~4294967295