Advertisement
Quick Links
Advertisement
Related Manuals for Jacuzzi Steam Enclosure
Summary of Contents for Jacuzzi Steam Enclosure
- Page 1 Steam Enclosure INSTALLATION INSTRUCTIONS WHIRLPOOL BATH...
- Page 2 Limited Warranty and Remedy Jacuzzi Whirlpool Bath (the "Company") warrants to the original purchaser ("user"), that the enclosures and frames supplied by it shall be free from material defects in material and workmanship for a period of one (1) year after purchase by the user, provided they are installed and maintained according to the Company's recommended practices and installation instructions.
- Page 4 Important: Read complete instructions before beginning installation. Remove the unit carefully from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Lay out and identify all parts using the installation instructions as reference. Check the carton for small hardware bags that tend to fall to the bottom of the carton.
- Page 5 Step 4 Position the wall jambs on each end of the bath track with notches in the bottom of the jambs pressed securely over the bath track. Use a level to plumb each wall jamb. Make a pencil mark on the wall through each of the holes in the wall jamb.
- Page 6 Step 7 All units are equipped with safety tee-lock jambs. When installed properly the header is permanently locked to the jambs and cannot be accidently dislodged. Slide the safety lock of the remaining wall jamb and jamb filler into the header. The rounded surface of the header goes to the exterior and the jamb filler should be positioned with the opening closet to the exterior of the wall jamb.
- Page 7 10-24 x 7/8" truss head screws. Step 11 Caulk the ends of the bath track and the interior surface of the wall jambs Step 12 Clean your Steam Enclosure with a soft cloth and nonabrasive cleaner.
- Page 8 USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT. Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product.