Telnet Connection Configuration - Zte ZXR10 5900 Series User Manual

Chapter 2 Usage and Operation
F 6 COM1 PROPERTIES
IGURE
Power on and boot ZXR10 5900/5200 to initialize the system and
to enter into configuration for operational use.

Telnet Connection Configuration

Telnet is the main remote configuration mode for the ZXR10
5900/5200.
Telnet access is set through user name and password. This enables
unauthorized users from accessing the switch through Telnet. Use
the following command to configure the user name and password.
username <username> password <password>
To strengthen the security of the switch, switch can limit telnet
login of the users. Use the following command to admit or refuse
telnet's IP address.
line telnet access-class <basic access list>
1. Connect the host directly to the switch and Telnet to the switch.
Confidential and Proprietary Information of ZTE CORPORATION 7