• Step 4. Display the "INITIAL SETTINGS" menu:
Note: If the unit is other than PROGRAM AE mode, it does not display the initial settings menu.
While keep pressing MENU/SET and "RIGHT of Cursor button" simultaneously, turn the Power off.
The "INITIAL SETTINGS" menu is displayed.
There are two kinds of "INITIAL SETTINGS" menu form as follows:
[CASE 1. After replacing MAIN P.C.B.]
There are four kinds of menu from as follows:
[Except for "DMC-TZ35EG, EF, EB, EP, GA and TZ36EG" models : (VEK0U02 is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, all of the model suffix are displayed as follows. (Four pages in total)
[Only for "DMC-TZ35EG, EF, EB, EP, GA and TZ36EG" models : (VEK0U03 is used as a Main P.C.B.)]
When Main P.C.B. has just been replaced, only 8 model suffix are displayed as follows. (Two pages in total)
To display the "TZ36" model suffix, choose the "EG" area and press the DELETE button.
11