Miele G 605 Operating Instructions Manual page 58

Dishwasher installation
For kitchens utilizing a non-con-
tinuous toekick
The included toekick will fit without
modification when:
– The machine is set to its maximum
height (legs fully extended), and
– the toekick is recessed as far as
possible (4 ").
If the machine height is less than maxi-
mum, or if the toekick is recessed less
than 4 ", the toekick must be shortened
(see following page).
After installation, carefully open the
dishwasher door to check that the
front panel does not hit the toekick.
If it does, remove the toekick and trim
it accordingly.
Adjusting the toekick recess
To adjust the depth (recess) of the toe-
kick, release the tension on the spring
clips as shown, and push the mount-
ing brackets in as far as possible.
58
Dishwasher model G 605 SC (i)
(see data plate for model number)
The flange on the end of the mounting
brackets must point towards the center
of the machine.
Dishwasher model G 805 SC (i)
(see data plate for model number)
The flange on the end of the mounting
brackets must point towards the out-
side of the machine.