Maintenance Instructions - Jacuzzi FUZION BATH SERIES 7260 Installation & Operation Instructions

Jacuzzi whirlpool user manual

Hide thumbs Also See for FUZION BATH SERIES 7260:

Specification sheet (2 pages)

Technical & specifications manual (21 pages)

Specification sheet (2 pages)

Table Of Contents

Table of Contents

Suction Cover/Strainer Maintenance

Clean the suction cover/strainer of hair and debris when

necessary. To do this, remove the center screw and detach

the square cover. Clean the cover by backflushing debris

from the holes. Replace the suction cover immediately after

cleaning. When reinstalling, orient the cover/strainer with the

small notch at the bottom. The gasket must be inserted into

the groove of the cover/strainer before reinstalling onto the

suction fitting.

CAUTION: Keep hair a minimum of 6 inches (15,2 cm)

away from the suction fitting at all times when the whirl-

pool system is operating. Hair longer than shoulder length

should be secured close to the head, or a bathing cap

should be worn. Do not operate the whirlpool system

with the suction cover removed! It is a safety device and

must always be in place on the suction fitting to mini-

mize the potential hazard of hair and body entrapment.

Chromotherapy Lighting

If your unit has Chromotherapy (LED) lighting and the lights

fail to function contact your Jacuzzi Whirlpool Bath dealer.

There are no customer serviceable components on the Chro-

motherapy lighting.

Replacement fixtures are available from your Jacuzzi

Whirlpool Bath dealer.

Illumatherapy

Lighting

If your unit has Illumatherapy

the lights fail to function contact your Jacuzzi Whirlpool Bath

dealer. There are no customer serviceable components on

the Illumatherapy lighting.

Replacement fixtures are available from your Jacuzzi

Whirlpool Bath dealer.

Jacuzzi Whirlpool Bath DE99000A