Sequencing 4:1; Sequencing - Overview; Create A Sequence - Pfaff expression line Owner's Manual

The sequencing function on your machine makes it possible to create stitches and sequences with your
own personal settings and to combine stitches and letters into sequences. You can add up to 40 stitches,
letters and commands in the same sequence. Save your own stitches and sequences on your machine and
reload and sew them any time you like.
All stitches in your sewing machine can be used for sequencing except for buttonholes, darning, tapering
stitches, button sewing and bartacks.

Sequencing - overview

1. Current stitch number
3. Sequence commands
4. Alphabet
5. Stitch width/stitch positioning
6. Stitch length/density
7. Character set (upper case/lower case, normal/
special symbols)
8. Font selection

Create a sequence

1. Press the sequencing button to enter
sequencing.
2. Press the number of the stitch you wish to use.
3. Press the number of the next stitch and it will
appear to the right of the previously entered
stitch.
marked by a cursor. Inserted stitches will be placed
at the cursor position. Move the cursor through the
sequence using the left and right arrow buttons on
the wheel.
Sequence commands
You can insert tie-offs, thread snips and stop
commands into your sequence. Use the arrow
buttons on the wheel to select a command and
press OK to insert it. It will be placed at the cursor
position.
Inserted commands will be included when you
save your sequence and will always be performed
when sewing it.
Note: You can insert up to 3 commands in each
sequence.
4:2
1
2
3
4
5
6
7
8