Table of Contents
Advertisement
1.
User Name
Input your user name supplied by ISP. If you don't know, please check with your ISP.
2.
Password
Input your Password supplied by ISP.
3.
Service Name
Input the service name supplied by ISP.
4.
Connection Type
It has three types: Continuous, Connect on Demand, and Manual.
5.
Idle Time
It is the time of inactivity before disconnecting your PPPoE session. Enter an Idle Time (in
minutes) to define a maximum period of time for which the Internet connect is maintained
during inactivity. If the connection is inactive for longer than the defined Idle Time, then the
connection will be dropped. Either set this to zero or enable Auto-reconnect to disable this
feature.
6.
MTU Size
MTU stands for Maximum Transmission Unit. For PPPoE connection, the default MTU should
be provided by computer operating systems (OS). Advanced users can set the MTU
manually for increasing the internet performance. The largest number allowed by Ethernet at
the network layer is 1492 byte
7.
DNS
If ISP provides you DNS information, please select Attain DNS automatically, otherwise
http://www.sapido.com.tw
34
USER MANUAL V1.0
Advertisement
Table of Contents
