Start Button; Engine Stop Switch - Honda TRX500FGA Owner's Manual

Start Button

LEFT HANDLEBAR
(2)
(1) start button

(2) engine stop switch

The start button ( ) is used for starting the engine. Pushing the button in 1
starts the engine. See Starting Procedure,
When the start button is pushed, the starter motor will crank the engine.
The starter motor will not operate if the engine stop switch is in the OFF
( ) position when the start button is pushed.
Engine Stop Switch
The engine stop switch ( ) is used to stop the engine in an emergency.
To operate, slide the switch to the OFF (
be in the RUN ( ) position to start the engine, and it should normally
remain in the RUN (
If your ATV is stopped with the ignition switch ON (
engine stop switch OFF (
ignition switch OFF (
Controls & Features
page 113
2
) position. The switch must
) position even when the engine is OFF.
), the battery will discharge. Turn the
) to prevent battery discharge.
Instruments & Controls
(1)
START
OFF
RUN
.
) and the
39