Start Button
LEFT HANDLEBAR
(1) start button
(2) engine stop switch
The start button ( ) is used for starting the engine. Pushing the button in
starts the engine. See
When the start button is pushed, the starter motor will crank the engine.
The starter motor will not operate if the engine stop switch is in the OFF
(
) position when the start button is pushed.
Engine Stop Switch
The engine stop switch ( ) is used to stop the engine in an emergency.
To operate, slide the switch to the OFF (
be in the RUN (
remain in the RUN (
If your ATV is stopped with the ignition switch ON (
engine stop switch OFF (
ignition switch OFF (
(1)
1
Starting Procedure,
2
) position to start the engine, and it should normally
) position even when the engine is OFF.
), the battery will discharge. Turn the
) to prevent battery discharge.
Controls & Features
START
OFF
RUN
page
67
) position. The switch must
Instruments & Controls
(2)
.
) and the
31