Dimensions; Torque Requirements - Exmark Lazer Z HP Operator's Manual

2.9.7 Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1" (2.5 cm) to 4.5" (11.4 cm.) in 1/4" (.64 cm.) increments.
The cutting height adjustment handle has a transport position and all adjustments
can be made while the operator remains seated. The foot operated deck lift
assist lever aids in raising the deck.
2.9.8 Mulching Kit: Optional.

2.10 DIMENSIONS

2.10.1 Overall Width:
w/46" Deck
w/50" Deck
w/56" Deck
2.10.2 Overall Length:
Roll Bar - Up
Roll Bar - Down
2.10.3 Overall Height:
2.10.4 Tread Width: (center to center of tires, widthwise)
Front Casters
2.10.5 Wheel Base:
2.10.6 Curb Weight:
* Note: Weight will vary slightly, depending on engine option.

2.11 TORQUE REQUIREMENTS

Bolt Location
Blade Drive Sheave Mounting Nut ................................90-110 ft-lbs. (122-149 N-m)
Cutter Housing Spindle Nut.........................................160-185 ft-lbs. (217-251 N-m)
Blade Mounting Bolt (lubricate with anti-seize) ....................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount Bolts ...............................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller (See Figure 5)
Nyloc Nut ...................................................................30-35 ft-lbs. (41-47 N-m)
Hex Capscrew ............................................................50-55 ft-lbs. (68-75 N-m)
Engine Mounting Bolts .......................................................15-20 ft-lbs. (20-27 N-m)
Wheel Motor Mounting Bolts .............................................72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut ...............................................minimum125 ft-lbs. (169 N-m)
Wheel Lug Nuts ..............................................................90-95 ft-lbs. (122-129 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts.........30-35 ft-lbs. (41-47 N-m)
Deck Drive Jackshaft Nut.................................................75-80 ft-lbs (102-108 N-m)
Clutch Retaining Bolt (secured with threadlocker) ...............55-60 ft-lbs. (75-81 N-m)
Without deck
44.9 in. (114.1 cm)
46.5 in. (118.1 cm)
48.5 in. (123.2 cm)
w/46" Deck
76.4 in. (194.1 cm)
82.4 in. (209.3 cm)
Roll Bar - Up
69.9 in. (177.5 cm)
w/46" Deck
34.4 in. (87.4 cm)
Drive Wheels
2.75 in. (75.6 cm)
(center of caster tire to center of drive tire)
w/46" Decks
48.0 in. (121.9 cm)
w/46" Deck
1080 lbs. (490 kg)
Discharge chute up Discharge chute down
49.5 in. (125.7 cm)
51.1 in. (129.8 cm)
57.3 in. (145.5 cm)
w/50" Deck
76.9 in. (195.3 cm)
82.9 in. (210.6 cm)
Roll Bar - Down
51.8 in. (131.6 cm)
w/50" Deck
36.4 in. (92.5 cm)
31.9 in. (81.0 cm)
w/50" Decks
48.5 in. (123.2 cm)
w/50" Deck
1135 lbs. (515 kg) 1190 lbs. (540 kg)
14
58.5 in. (148.6 cm)
62.7 in. (159.3 cm)
68.9 in. (175.0 cm)
w/56" Deck
82.0 in. (208.3 cm)
88.0 in (223.5 cm)
w/56" Deck
38.4 in. (97.5 cm)
33.3 in. (84.6 cm)
w/56" Deck
52.0 in. (132.1 cm)
w/56" Deck
Torque